Constructions and operation
Magnetic band filters consist of a series PB band filter with a series MA magnetic separator positioned in front of it.
The medium to be cleaned passes from the machine into the infeed tank of the magnetic separator. The rotating magnetic roller immediately removes the vast majority of the ferrous magnetic impurities and moves them, after dry crushing them with the pressure roller, through the wiper plate into a sludge box. A baffle plate feeds the medium thus cleaned to the band filter. The medium passes through a trough-shaped filter fleece by means of gravity during which the remaining impurities, even those which are not magnetic, are filtered out. The filter cake thus formed has a positive influence on the filter fineness. The increasing saturation level trips the transport of the filter fleece via the float switch, the control electrics and the geared motor.
The used filter fleece is transported into the sludge box and new filter fleece inserted into the filter trough (the sludge box is not supplied as standard).

The series of three band filter systems shown on the picture above was produced for a famous German manufacturer of complete filter systems and was exported within the framework of a large project.

According to the specific needs of our costumers, filter, filter systems and filter systems with several filters are produced with special components, which correspond to the specific technical case of operation.

Meaningful documentations (available in a foreign language on request) make the installation and the technical servicing by own staff easier.

Our own servicing staff is of course also available for our costumers (in our home country in no longer than 24 hours).

A lot of spare parts and expendable items can be found in our stock, so that short delivery periods can be guaranteed.