Magnetic seperator MA
Classic with a high efficiency

Based on more than 50 years of experience of our predecessor, we can offer an efficient and optimised series of magnetic separators in various sizes.

Magnetic separators with a capacity between 60 l/min and 400 l/min have an aluminium cast casing. Machines with a capacity between 400 l/min and 600 l/min are welded constructions made of stainless steel. The magnetic filter system MA 100 (100 l/min for a viscosity of 6 mm² /s) can be seen on the photo above. The casing of the magnetic roller has been removed to show the arrangement of the permanent magnets.

Magnetic separators are also often used as main-filter in a filter system.
Our photo shows the filter system FA - MA100 with tank and pump.

Use
Magnetic separators are used for the fully automatic continuous cleaning of cutting fluids with normal requirements on the purity level and when machining ferrous, magnetic material.

Construction and operation
The filter consists of a specially designed aluminium cast casting, in which a magnetic roller, driven by a geared motor turns continuously. The filter is supplemented by a rubber pressure roller mounted in rockers and a wiper plate.
The medium to be filtered is fed into the infeed container and flows over the overflow edge in gullies towards the magnetic roller.
Since the gully outfeed is directly opposite to the magnetic poles, the fluid flows into the areas of maximum force line concentration. As it does so the vast majority of ferrous magnetic and other impurities are attracted.
The fluid is them refiltered within the through-shaped bottom section.
As a result of the continuous turning of the magnetic roller the attracted impurities are taken to the outfeed point on the wiper plate after being crushed dry by the rubber pressure roller.

Materials and application conditions
Casing: Aluminium cast
Magnet body: Oxide ceramics
Pressure roller: Rubber, oil-resistant

Cleaning and maintenance
When cleaning the unit, the relevant accident prevention regulations and the environmental directives must be observed. If the unit is to be at a standstill for any length of tine we recommend that the magnetic roller and the casting are cleaned first.

Example order
Magnetic separator for a capacity of 100 l/min with a viscosity of up to 6 mm² /s:
Magnetic separator MA 100
To order the MA series can be supplemented with a coolant tank, pumps, sludge box, electrical system, etc. and can also be supplied as complete filter systems (see information sheet entitled “Filter system with magnetic separator”).